Wastewater Flow Control Measurement Products

  1. OPTISONIC 7300 Ultrasonic Flowmeter
    9/16/2019

    The OPTISONIC 7300 is a universal 2-path ultrasonic gas flowmeter for process and utility gas measurements in oil and gas refineries or the chemical or petrochemical industries. It is also suitable for non-custody transfer natural gas applications or applications with (compressed) air, mixed or flue gases (up to +180°C / +356°F). Using the transit time differential measuring principle, the OPTISONIC 7300 delivers high performance over a wide flow range (up to DN600 / 24", turndown ratio: 100:1). Its patented titanium transducers are perfectly focused, equalizing process fluctuations and avoiding acoustic feedback.

  2. OPTISONIC 6300 Ultrasonic Clamp-On Flowmeter
    9/16/2019

    The OPTISONIC 6300 is an ultrasonic clamp-on flowmeter for permanent mount installation. It is particularly suitable for flow measurement of (non-)conductive liquids at any location where inline measurement is not possible or desirable. The flowmeter consists of a combination of one or two clamp-on sensors and one ultrasonic signal converter. Its robust clamp-on rail is highly flexible and can be very easily attached to virtually any pipe up to DN4000 / 160".

  3. OPTISONIC 6300 P Ultrasonic Clamp-On Flowmeter
    9/16/2019

    The OPTISONIC 6300 P is a portable, battery-powered ultrasonic clamp-on flowmeter for temporary flow measurement of (non-)conductive liquids. It can be used at virtually any location and without process interruption or need to cut pipes. Due to its flexibility, the meter is equally suited for comparative measurements on stationary measuring equipment (e.g. pumps, flowmeters etc.) or for use as a short-term replacement of faulty devices. As standard the clamp-on flowmeter is also provided with a measurement option for thermal energy applications.

  4. OPTISONIC 3400 Ultrasonic Flowmeter
    9/16/2019

    The OPTISONIC 3400 is a 3-path ultrasonic inline flowmeter designed for a wide range of standard or more demanding process applications with homogeneous, non-viscous aqueous liquids as well as viscous fluids of up to over 1000 cSt. It is also the perfect choice for applications with cryogenic products (as low as -200°C / -328°F), media with extended temperature ranges (up to +250°C / +482°F) as well as low or extreme pressure ratings. The OPTISONIC 3400 offers a broad range of diameters – from DN25 / 1" for dosing purposes to DN3000 / 120" for water transportation pipelines.

  5. OPTIBATCH 4011 Coriolis Mass Flowmeter
    9/16/2019

    The OPTIBATCH  4011 is the standard Coriolis mass flowmeter for process batching of conductive and non-conductive liquids. It is a highly accurate and specialised meter for linear and rotating filling machines. The fully welded maintenance-free device with twin U-shape is particularly suitable for hygienic applications in the pharmaceutical or food and beverage industries. It can be equipped with DIN11864-2 hygienic flange connections, hygienic clamp connections or many other bespoke fittings according to customer specifications.

  6. OPTIMASS 1010 Coriolis Mass Flowmeter
    9/16/2019

    The OPTIMASS 1010 is a cost-effective twin straight tube Coriolis mass flowmeter for a wide range of universal and hygienic applications with liquids and gases (up to 170,000 kg/h or 6,235 lb/min and +130°C / +266°F). It features an integrated Modbus converter. This makes the flowmeter an ideal solution where a DCS or a PLC is already in use and extensive communication options and control functions are not necessary. By way of its Modbus interface the flowmeter integrates easily into existing controller systems. There is no need for a conventional signal converter. Purchase costs can be saved.

  7. OPTIMASS 3010 Coriolis Mass Flowmeter
    9/16/2019

    The OPTIMASS 3010 is a cost-effective Coriolis mass flowmeter for low flow and dosing applications with liquids and gases (from 0.3 kg/h or 0.01 lb/min upwards). The flowmeter features an integrated Modbus converter. This makes it the ideal solution for applications where a DCS or a PLC is already in use and extensive communication options and control functions are not necessary. By way of its Modbus interface the flowmeter integrates easily into existing controller systems. There is no need for a conventional signal converter. Purchase costs can be saved.

  8. OPTIMASS 7010 Coriolis Mass Flowmeter
    9/16/2019

    The OPTIMASS 7010 is a high-end single straight tube Coriolis mass flowmeter. It is particularly suitable for demanding process and dosing applications involving gases and shear-sensitive or viscous liquids, slurries, very aggressive media or media with a low flow velocity. The Coriolis meter features an integrated Modbus converter. This makes it the ideal solution for applications where a DCS or a PLC is already in use and extensive communication options and control functions are not necessary. By way of its Modbus interface the flowmeter integrates easily into existing controller systems. There is no need for a conventional signal converter. Purchase costs can be saved.

  9. OPTIMASS 3400 Coriolis Mass Flowmeter
    9/16/2019

    The OPTIMASS 3400 is a cost-effective Coriolis mass flowmeter for accurate flow measurement of liquids and gases in a variety of demanding low flow and dosing applications (from 0.3 kg/h or 0.01 lb/min upwards). The OPTIMASS 3400 features Entrained Gas Management (EGMTM) for liquid applications, providing reliable readings even in the event of gas entrainment of up to 100%. In this way, the Coriolis meter enables continuous and uninterrupted measurement of volume flow and mass, density and temperature –  even at very difficult process conditions with 2-phase flow.

  10. OPTIMASS 1400 Coriolis Mass Flowmeter
    9/16/2019

    The OPTIMASS 1400 is a cost-effective twin straight tube Coriolis mass flowmeter for a wide range of standard applications with gases and liquids (up to 170,000 kg/h or 6,235 lb/min). The meter features Entrained Gas Management (EGMTM) for liquid applications, providing reliable readings even in the event of gas entrainment of up to 100%. In this way, the Coriolis meter enables continuous and uninterrupted measurement of volume flow and mass, density and temperature – even at difficult process conditions with 2-phase flow.