Drinking Water Flow Control and Measurement Application Notes

  1. Echotel® Non-Contact Ultrasonic Two-Wire Transmitter
    11/15/2013

    Echotel® Model 355 is a loop-powered, non-contact-type ultrasonic transmitter that performs liquid level, volume or open channel flow measurement.

  2. OPTIFLUX 6050 Electromagnetic Flowmeter
    9/9/2019

    The OPTIFLUX 6050 is an electromagnetic flowmeter (EMF) for basic hygienic applications in the food sector. It offers cost-effective flow measurement where an extremely high accuracy, extensive diagnostics or a wide range of digital communication options are not a priority. The 3A and EHEDG certified flowmeter comes with industry specific hygienic adapters. It has no crevices, gaps or blind spots and is specifically designed to stay free of contamination. This way, it complies with the most stringent hygienic demands in the food and beverage industry.

  3. Signal Converter For Electromagnetic Flowmeters
    8/29/2016

    The electromagnetic signal converter IFC 050 is a perfect choice for measuring volumetric flow in various kinds of applications in the water industry but also in the food and beverage business.

  4. POWERFLUX 4300 Electromagnetic Flowmeter
    9/3/2019

    The POWERFLUX 4300 is an electromagnetic flowmeter specifically designed for applications with electrically conductive liquids in the nuclear industry. It comes with a compact or remote digital signal converter and a radiation hardened sensor. The sensor features a chemically resistant PFA or ETFE liner material. All construction materials of the flowmeter are selected and tested to meet the high demands of the nuclear industry. This way, the rugged flowmeter withstands the most hostile and demanding environments of nuclear applications (e.g. with borated water). The flowmeter offers extensive diagnostics for maximum reliability and comes with various digital communication options.

  5. OPTIFLUX 6300 Electromagnetic Flowmeter
    9/9/2019

    The OPTIFLUX 6300 is an electromagnetic flowmeter (EMF) for advanced hygienic applications in the food sector. The high-end flowmeter is particularly suitable for blending, dosing or filling applications where a high accuracy (±0.2% of measured value) is priority and extensive diagnostics are required. In addition, it can even be used for low conductivity liquids of ≥ 1 μS/cm (e.g. glucose, fruit concentrates). The 3A and EHEDG certified flowmeter comes with industry specific installation lengths. It has no crevices, gaps or blind spots and is specifically designed to stay clean and sterile. This way, it complies with the most stringent demands in the food and beverage industry.

  6. Model R82 Pulse Burst Radar Transmitter
    11/15/2013

    The Magnetrol® Model R82 is an economical, loop-powered radar transmitter bringing radar to everyday applications.

  7. Capital Controls® Series 480 Vacuum Gas Feeders
    10/8/2015

    The Capital Controls® Series 480 all-vacuum gas feeder is designed for direct mounting to a 150 pound gas cylinder or ton container. It is a basic alternative for those applications requiring a chlorine feed rate of 250 PPD (5 kg/h) or less. The gas feed rate is controlled under sonic flow conditions eliminating the need for an auxiliary differential pressure regulators.

  8. Capital Controls® Series 71P11A Gas Pressure Reducing Valve
    10/15/2015

    The Series 71P11A Gas Pressure Reducing and Shutoff Valve is a diaphragm-type gas pressure regulating valve designed for use on chlorine, sulfur dioxide and ammonia gas service. The valve is used in a gas dispensing system to prevent liquefaction of the gas by providing a controlled pressure drop in the piping system. Downstream pressure is regulated to a reduced value by adjustment of the control setting. If the downstream pressure exceeds the pressure at which the valve is set, gas flow will be shut off.

  9. Grundfos Booster Module Systems
    5/13/2014

    The BMS range is a new range of booster modules for reverse osmosis and ultra-filtration applications that improve efficiency with a directly coupled pump powered by a permanent magnet motor and VFD.

  10. FlowConnect
    3/17/2017

    FlowConnect is a built-in solution for collecting and transmitting flow data from McCrometer’s Mc Propeller and Water Specialties Propeller meters, automating data collection to provide accurate and reliable information for water resource management.